Short answer
A wider back comes from your lats. Train vertical pulls like pull-ups and lat pulldowns for width, rows for thickness, twice a week with about 10 to 20 hard sets. Add weight or reps over time, eat enough protein and expect the first visible changes after 8 to 12 weeks.
A wide back is half the battle for the V-taper, and it’s what makes a body look massive from behind. The path there follows a few clear principles: pull from above for width, pull toward you for thickness, get stronger every week.
Here’s the most important principle first, then the back muscles, the best exercises, what grip width really does, a complete 2-day back workout and how long it takes.
Key takeaways
- Width comes from your lats, the big “wing” muscles.
- Vertical pulls (pull-up, lat pulldown) build width, horizontal pulls (rows) build thickness.
- Grip width matters less than you think: an overhand grip and a full range of motion matter more than a super-wide grip.
- Twice a week, 10 to 20 hard sets, with progressive load and enough recovery.
- A V-taper needs wide lats plus broad side delts and a lean waist.
Contents
Width or Thickness? The Principle First
The most important point most people skip: a “wide” back has two components, and you train them differently. Width is the lateral spread, the wings that make your upper body look wide from the front and back. It comes from the lats and is built through vertical pulls: anything you pull from above down toward you (pull-up, lat pulldown). Thickness is the depth of the back, especially in the middle. It comes from the upper and mid back and is built through horizontal pulls: anything you pull toward your body (rows).
The direction of the pull decides
Vertical pulling builds width, horizontal pulling builds thickness.
A complete back needs both, but for pure width, vertical pulls come first.
For a wide back, the focus is on vertical pulls. Thickness rounds out the picture and provides posture and stability, so never neglect it completely.
The Back Muscles at a Glance
The back isn’t a single muscle, it’s several working together. If you know which muscle does what, you train with more purpose:
| Muscle | What it does | Best exercises |
|---|---|---|
| Latissimus dorsi | The big wing: creates width and the V-shape | Pull-ups, lat pulldowns, straight-arm pulldowns |
| Trapezius | Upper and mid back: thickness and posture | Rows, shrugs |
| Rhomboids | Between the shoulder blades: thickness, pulls them together | Rows, face pulls |
| Teres major | Small “helper lat” under the armpit, adds width up top | Pull-ups, pulldowns |
| Erector spinae | Along the spine: stability and upright posture | Deadlifts, back extensions |
The star for width is your lats. They run from your lower back and pelvis up the side of your torso to your upper arm, which is exactly why they get wider when you pull your elbows down from above.
The Best Back Exercises for a Wider Back
Five exercises do most of the work: three for width, two for thickness. Together they give you a complete back.
1. Pull-ups: the king of width
No bodyweight exercise builds the lats like the pull-up. With an overhand grip slightly wider than your shoulders, pull yourself up from a dead hang until your chin clears the bar, then lower under control. Once you can do 10 to 12 clean reps, add weight with a dip belt. The clean technique is in the basic exercises guide.
2. Lat pulldown: the volume builder
If you can’t do clean pull-ups yet or want extra volume for your lats, the lat pulldown is the best choice. Pull the bar to your upper chest, drive your elbows down and slightly back, keep your chest up and hold the stretch briefly at the top. Same muscle as the pull-up, with a weight you can choose freely.
3. Straight-arm pulldown: lat isolation
Arms almost straight, pull a bar or rope from eye level down to your thighs on the cable. Your biceps barely work, so your lats get all of it. Ideal as a finisher or to feel your lats before pull-ups.
4. Rows: the foundation for thickness
Barbell, dumbbell, cable or chest-supported: rows fill out the mid back. Pull the weight toward your lower ribs and squeeze your shoulder blades together instead of yanking with your arms. Pulling toward your hips with elbows close to your body shifts more work to the lats. The single-arm dumbbell row is great for evening out side-to-side differences.
5. T-bar row: mass for the middle
One of the best exercises for a thick, strong mid back. The leverage lets you move a lot of weight and hit your lats and mid back at the same time. Keep your back neutral and your core tight.



Does Grip Width Matter for a Wider Back?
The gym classic says “wide grip for a wide back”. The research says it matters less than you think. In a study comparing wide and narrow grips on the lat pulldown, grip width made no significant difference to lat activity. What did matter: an overhand grip activated the lats more than an underhand grip (Lusk et al. 2010).
In practice: use an overhand grip slightly wider than your shoulders, the one that lets you pull through the fullest range of motion without shoulder pain. A super-wide grip shortens the movement and doesn’t make you wider.
Back Workout Plan: 2 Days for Width and Thickness
Train your back twice a week with at least two days in between. Day A focuses on width, day B on thickness. Together that’s about 20 hard sets for the back per week.
| Exercise | Sets × reps | Note |
|---|---|---|
| Day A: width | ||
| Pull-ups (weighted when possible) | 4 × 6–10 | Full hang, chin over the bar |
| Lat pulldown | 3 × 8–12 | Elbows to your hips |
| Straight-arm pulldown | 2 × 12–15 | Arms almost straight |
| Lateral raises | 3 × 12–20 | Side delts for the V-taper |
| Day B: thickness | ||
| Barbell row | 4 × 6–10 | Flat back, pull to the lower ribs |
| T-bar or chest-supported row | 3 × 8–12 | Squeeze the shoulder blades |
| Single-arm dumbbell row | 3 × 10–12 per side | Pull toward the hip for lats |
| Face pulls | 2 × 15 | Rear delts and posture |
The key lever is progressive overload: once you hit the top of the rep range, add weight. End most sets with one to three reps in the tank. This plan fits into an upper/lower split as your two upper-body days.
Heavy pulling often fails at the grip before your back is tired. The right accessories keep you in the set longer:
Lifting Straps Extra GripMore grip on pull-ups & rowsView
Leather Lifting BeltSupport on heavy rows & deadliftsView
Leather Gym GlovesProtection and grip on the barView
→ More for pull-ups and dips in our calisthenics equipment.
How to Get a Broad Upper Body and a V-Taper
A broad frame is more than your back. The V-taper comes from three things: wide lats, broad side delts and a lean waist. The lats give you width from behind, the side delts widen your silhouette at the top, and a lower body fat level makes the contrast to your waist visible. That’s why lateral raises are in the plan above.
Then there’s posture: stand tall, chest out, shoulders back. A well-trained back pulls your shoulders into that position and instantly makes you look wider. How to show off the width with the right clothing is covered in the styling guide. Together with a broad chest, a wide back completes the V-shape.
Wide Back at Home
For width, you don’t need a gym, just something to pull yourself up on. A doorway pull-up bar is enough for the single most effective exercise. If you can’t do full pull-ups yet, work with negatives (just the slow lowering) or use a resistance band for assistance. For thickness, inverted rows under a sturdy table or rows with a loaded backpack or dumbbells do the job. You’ll find complete bodyweight routines in the calisthenics guide and the home workout plan.
How Long Does It Take to Get a Wider Back?
| Timeframe | What happens |
|---|---|
| Weeks 1–4 | Strength goes up fast, mostly because you learn to feel and use your lats. Little visible change yet. |
| Weeks 8–12 | First visible changes, especially from behind and in photos. |
| 6–12 months | A clearly wider back and a visible V-taper, if you keep progressing. |
Without enough building material, even the best-trained back won’t grow. How much protein you need is in the protein guide, and why muscle grows during rest is in the recovery guide.
Common Mistakes That Keep Your Back Narrow
- Pulling with the arms: your biceps give out before your lats get the work. Drive with the elbows.
- Half reps: no full hang, no full stretch. The stretch at the top is where the lats work hardest.
- Too much body swing: leaning back and jerking turns a pulldown into a mid-back row.
- Only rows, no vertical pulls: you build thickness, not width.
- No progression: the same weight for months means the same back for months.
- Letting the grip decide: if your hands fail first, use straps for the heavy sets.
A wide back is no accident: pull vertically for width, horizontally for thickness, get heavier over the weeks, plus protein and sleep. Do that consistently for months and your narrow frame turns into a silhouette that impresses from behind.
Pull heavy. Progress. Build your wings.
Width is built from above.
Read next
- Broad chest: the other half of the V-shape.
- Basic exercises: technique for the pull-up and the deadlift.
- Upper/lower split: a complete 4-day plan.
- Muscle building guide: volume, progression and nutrition.
- Calisthenics: a wide back with your own bodyweight.
Wide Back FAQ
How do I get a wider back?
Through vertical pulling exercises like pull-ups and lat pulldowns, which hit the lats, the muscles that create width. Add rows for thickness in the mid back. What matters is progressive load over weeks, two back sessions a week, about 10 to 20 hard sets and enough protein. The wide look comes from developed lats, strong side delts and upright posture.
What’s the difference between back width and thickness?
Width is the lateral spread of the back, the V-shape. It comes from the lats and is trained with vertical pulls like pull-ups and lat pulldowns. Thickness is the depth, especially in the middle of the back. It comes from the upper and mid back and is trained with horizontal pulls like rows. A complete back needs both.
Which exercise makes your back the widest?
The pull-up. No exercise hits the lats as effectively with your own bodyweight, and it’s easy to progress with added weight. If you can’t do pull-ups yet, use the lat pulldown and work your way up with negatives or a band.
Do wide-grip pull-ups make your back wider?
Not more than a normal grip. In a study on the lat pulldown, grip width made no significant difference to lat activity, while an overhand grip activated the lats more than an underhand grip. Use a grip slightly wider than your shoulders that lets you pull through a full range of motion.
How long does it take to get a wider back?
First visible changes usually show after 8 to 12 weeks of consistent training with two back sessions a week. A clearly wider back is a project of 6 to 12 months or more. Beginners grow fastest, experienced lifters need more volume and patience.
How do I get a broad upper body?
A broad upper body comes from wide lats plus strong, broad shoulders, especially the side delts. Train vertical pulls for your back, add lateral raises for your shoulders, and work on posture: a strong back pulls your shoulders back and instantly makes you look wider.
How do I train my lats?
With vertical pulls: overhand pull-ups and lat pulldowns are the most effective, plus straight-arm pulldowns as an isolation exercise. Start each rep by driving your elbows down toward your hips instead of pulling with your hands, and use a full stretch at the top.
Can you build a wide back at home?
Yes. A doorway pull-up bar covers the most effective exercise. Beginners use negatives or a resistance band for help. For thickness, do inverted rows under a sturdy table or rows with a loaded backpack or dumbbells.
Can you get a wider back with dumbbells only?
Mostly, yes. Single-arm dumbbell rows, chest-supported rows and dumbbell pullovers train the lats and mid back well. For real width you’ll still want some form of vertical pull, ideally pull-ups on a bar.
How often should I train my back?
Two times a week is ideal, with enough recovery in between. Three to four exercises per session covering width and thickness, three to four sets each, is plenty. More important than the perfect number is that you get stronger over the weeks.
How many sets per week for a wider back?
Around 10 to 20 hard sets per week works for most people. Spread them over two sessions and take most sets close to failure. Beginners grow well at the lower end, advanced lifters often need more.
Do these exercises work for women too?
Yes, the principles are the same for everyone: vertical pulls build width, horizontal pulls build thickness. Women build less mass because of their hormonal profile, but the same exercises shape a strong, defined back and a clear V-line to the waist.
Sources
- Lusk, S. J., Hale, B. D., Russell, D. M. (2010). Grip width and forearm orientation effects on muscle activity during the lat pull-down. Journal of Strength and Conditioning Research 24(7): 1895–1900. DOI: 10.1519/JSC.0b013e3181ddb0ab
- Schoenfeld, B. J., Ogborn, D., Krieger, J. W. (2017). Dose-response relationship between weekly resistance training volume and increases in muscle mass: a systematic review and meta-analysis. Journal of Sports Sciences 35(11): 1073–1082.
About Gym Generation
Since 2013, we’ve been equipping athletes in Switzerland and across Europe for training. We tell you straight what works (pull, get heavier, be patient) instead of selling you the next miracle cure. From a Swiss perspective, focused on what counts.
Note: This article is for general information only and does not replace medical or physiotherapy advice. Perform the exercises with clean technique and a suitable weight and increase the load gradually. If you have back or shoulder problems, talk to a professional before training hard.